sae 4140 quenched-----Shanghai Katalor Enterprises Co., Ltd.
   

0086-21-61182423

[email protected]

sae 4140 quenched

  • Thickness: 6mm-80mm
  • Width: 1500mm-4200mm
  • Length: 3000mm-18000mm
  • Steel Standard: API 5L PSL1,API 5L PSL2
  • Heat Treatment: TMCP/Normalized/QT/DQ-T
  • Main Grades: X42,X46,X52,X56,X60,X65,X70,X80
(※ Click this button to inquiry)
■ Overview

AISI 4140 Steel, oil quenched, 540°C (1000°F) temper, 25 ...

Property Data; This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material suppliers, etc), please click the button below.

Quenched and Tempered 4140 Cr-Mo Steel :: …

Quenched and tempered SAE-AISI 4140 is SAE-AISI 4140 steel in the quenched and tempered condition. It has the highest strength compared to the other variants of SAE-AISI 4140 steel.

Quenched And Tempered SAE-AISI 4140 vs. SAE-AISI 1144 ...

Both quenched and tempered SAE-AISI 4140 and SAE-AISI 1144 steel are iron alloys. They have a very high 99% of their average alloy composition in common. There are …

Mechanical properties of 4140 steel - EVOCD

Figure 4: Monotonic stress-strain curve and cyclic stress-strain curve at half the number of cycles to failure of quenched-and-tempered AISI 4140 steel at nearly the same strain rates.[PDF]

SAE 4140 Quenched and Tempered Steel Iteration #69

SAE 4140 Quenched and Tempered Steel Iteration #69 Fatigue Behavior, Monotonic Properties and Microstructural Data Prepared by: A.A. Rteil and

4140 CF Quench & Tempered Stress Relieved | Alro Steel

4140 cf qt sr Alro stocks 4140 CF Q&T -a steel in the family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common variant stylings include chrome-moly, CrMo, CRMO, CR-MOLY, and ...

AISI 4140 Alloy Steel | 1.7225 | SCM440 | 42CrMo4

4140 alloy steel material is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality medium carbon alloy steel, Oil Quenched & Tempered Hardenss is 28-34 HRC.4140 Annealing delivery hardenss less than 250HB.[PDF]

4140 High tensile - ssm.co.nz

4140 is the most commonly used of the high tensile steels with a wide range of applications in automotive, Gear and Engine construction, Crankshafts, Steering knuckles, Connecting rods, Spindles, Intermediate gears, Pump and Gear shafts.

Heat Treating 4140 steel FAQ : anvilfire How-to.

While large 4140 rounds can be water-quenched, squares are a different story. Each corner of a die is a three-sided pyramid and in quenching the corners will cool very quickly, often causing "finger-nail" cracking of the corners.[PDF]

4140HW Alloy Steel Technical Data

1625°F (885°C) and water quenched. Soak time of approximately 60 minutes at temper temperature. Figure 2 (Strength vs. Tempering) This data generated in a laboratory shows the effect of tempering on strength for 1.25" and 2" wall tubing. Austenitized at 1625°F (885°C) and water quenched.

Quenched And Tempered SAE-AISI 4140 vs. SAE-AISI 1144 ...

Both quenched and tempered SAE-AISI 4140 and SAE-AISI 1144 steel are iron alloys. They have a very high 99% of their average alloy composition in common. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown.

4140 CF Quench & Tempered Stress Relieved | Alro Steel

4140 CF QT SR Alloy Alro stocks 4140 CF Q&T -a steel in the family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE).

AISI 4140 Alloy Steel | 1.7225 | SCM440 | 42CrMo4

The following datasheet gives an overview of AISI 4140 alloy steel. 4140 alloy steel material is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality medium carbon alloy steel, Oil Quenched & Tempered Hardenss is 28-34 HRC.4140 Annealing delivery …[PDF]

SAE 4140 Quenched and Tempered Steel Iteration #67

SAE 4140 Quenched and Tempered Steel Iteration #67 Fatigue Behavior, Monotonic Properties and Microstructural Data Prepared by: A.A. Rteil and

ASTM 4140 Steel | 1.7225 - Dongguan OTAI Special Steel Co

AISI 4140 Steel Hardening & Quenching . 4140 Steel is usually used at 18-22 HRc, If needs, AISI 4140 alloy steel can be hardened or Quenching by cold work. Quenching medium: oil . Tempering Of ASTM 4140 Alloy Steel / ℃ tempering temperature: 205 ~ 649°C. After tempering hardness HRC: 18-25 HRC.

4140 High Tensile Steel | Interlloy | Engineering Steels ...

4140 is a 1% chromium - molybdenum medium hardenability general purpose high tensile steel - generally supplied hardened and tempered in the tensile range of 850 - 1000 Mpa (condition T).4140 is now available with improved machinability, which greatly increases feeds and/or speeds, while also extending tool life without adversley affecting mechanical properties.[PDF]

HIGH TENSILE STEEL AISI 4140 - S&T Stainless

HIGH TENSILE STEEL – AISI 4140 - continued WELDING: Readily welded in the annealed condition but avoid when possible if hardened and tempered due to the effect on the mechanical properties.

4140 Steel & 4150 Steel | Specialty Steel Co.

AISI 4140 and 4150 is a medium carbon, chromium-molybdenum alloy steel. This steel is offered in a wide range of conditions including but not limited to: cold drawn annealed, hot roll heat treated, heat treated turned ground and polished.[PDF]

Jominy End Quenching of 4140 Steel: The Effect of Time …

Quench test. In this test a 140mm long and 25.4 mm in diameter sample is heated into the ... 4140 steel was used and heated to 850°C, 900°C and 950°C. At 900°C and 950°C the heat times are as follows a half hour, two hours, and four hours. At 850°C two bars[PDF]

Alloys - Alro Steel | American Metal Supplier | Since 1948

8-3 AISI 4140/41L40 - ANNEALED This medium carbon alloy grade is widely used for many general purpose parts requiring high tensile strength and toughness. 4140 contains chromium and molybdenum as

AISI/SAE 4140 Quenched & Tempered Bars (India Trading ...

AISI/SAE 4140 Quenched & Tempered Bars We are Stockholder & Distributors of AISI 1045/SAE 1045, AISI 4130/SAE 4130 AISI 4140/SAE 4140, AISI 4145/SAE 4145, AISI 4150/SAE 4150, AISI 4340/SAE 4340, AISI 8620/SAE 8620, EN8, EN9, EN19.

Fatigue of the Quenched and Tempered Steel 42CrMo4 (SAE ...

Two types of specimens of the quenched and hardened steel 42CrMo4 (similar to SAE 4140) that differed in their residual stress state were tested by combined tension-torsion in- …[PDF]

4340 High tensile steel - ssm.co.nz

AS DIN BS AISI NEAREST STANDARD 4340 1.6565 34CrNiMo6 ... particularly in large cross sections in the quenched and tempered condition. The addition of Molybdenum prevents the steel from being ... Higher tensile and yield strength than 4140. APPLICATIONS Components for the aircraft, automotive and general engineering industries eg. Propeller ...

Wingate Alloys Inc.

AISI 4140 PREHARD HEAT TREATED MATERIAL OR ANNEALED. IN STOCK FOR IMMEDIATE SHIPMENT. 4140 Chromium-Molybdenum Steel. Supplied in the annealed or prehardened condition. 4140 PREHARD is heat treated to a medium hardness (HRC 28/32) and is designated as 4140 HT. 4140 annealed is supplied in the soft condition and can be hardened to RC 40.
Inquiry >>
[email protected]0086-21-61182423
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :