34crmo4 mbicrostructure-----Shanghai Katalor Enterprises Co., Ltd.
   

0086-21-61182423

[email protected]

34crmo4 mbicrostructure

  • Thickness: 6mm-80mm
  • Width: 1500mm-4200mm
  • Length: 3000mm-18000mm
  • Steel Standard: API 5L PSL1,API 5L PSL2
  • Heat Treatment: TMCP/Normalized/QT/DQ-T
  • Main Grades: X42,X46,X52,X56,X60,X65,X70,X80
(※ Click this button to inquiry)
■ Overview
[PDF]

STRUCTURAL-MECHANICAL PROPERTIES OF V-N …

34CrMo4 steel, control cooling process, microstructure, mechanical properties INTRODUCTION The Cr-Mo steel grades are commonly used steels for the variety of applications, especially for the high

Corrosion Properties of 34CrMo4 Steel Modified by Shot …

The electrochemical behavior of 34CrMo4 steel before and after SP was evaluated by electrochemical workstation (CH Instrument, CHI-660E), and both evaluations were performed with a three-electrode system (i.e., 34CrMo4 steel, Calomel electrode, and Pt as working electrode, reference electrode, and counter electrode, resp.).

34CrMo4 / 1.7220 Alloy special steel - equivalent ...

Chemical composition of steel 34CrMo4 (1.7220), Standards of steel 34CrMo4 (1.7220) Mechanical Properties of steel 34CrMo4 (1.7220) Equivalent grades of steel 34CrMo4 (1.7220) Tensile Strength, Elongation, Proof strength, Hardness

34CrMo4 – Trafileria Mauri

Weldability: Low weldability; this steel grade can be welded only with suitable precautions. Hardenability: Steel grade with medium carbon content showing a poor hardenability; sensitive to notching and to quenching cracks.

Hydrogen Transport in 34CrMo4 Martensitic Steel: …

A 34CrMo4 quenched steel has been selected and designed at three tempering temperatures (200°C, 540°C and 680°C) in order to obtain three different microstructures. According to permeation measurements, H diffusion strongly depends on the microstructure.[PDF]

34CrMo4 STEEL RESISTANCE AGAINST THE SSC AFTER …

P. Kučera, E. Mazancová: 34CrMo4 steel resistance against the SSC after controlled cooling process aterials Engineering - Materiálové inžinierstvo 21 (2014) 61-67 62[PDF]

Simulation of the carbides precipitation mechanism in ...

34CrMo4 steel vanadium/nitrogen rate is high enough for precipitation of the carbides and carbonitrides. Most of the ... T. N. Baker, “Processes, microstructure and properties of vanadium microalloyed steels,” Materials Science and Technology 25, pp. 1083-1107, 2009.Published in: International Journal of Materials Science and Applications · 2014Authors: Miroslav Kvicala · Michaela StamborskaAffiliation: Technical University of OstravaAbout: Vanadium · Precipitation

Hydrogen Transport in 34CrMo4 Martensitic Steel: Influence ...

A 34CrMo4 quenched steel has been selected and designed at three tempering temperatures (200°C, 540°C and 680°C) in order to obtain three different microstructures. According to permeation measurements, H diffusion strongly depends on the microstructure.

34CrMoS4 / 1.7226 Alloy special steel - equivalent ...

Properties of steel 34CrMoS4 (1.7226) Weldability: Low weldability; this steel grade can be welded only with suitable precautions. Hardenability: Steel grade with medium carbon content showing a poor hardenability; sensitive to notching and to quenching cracks.

DIN 34CrMo4 datasheet,DIN 34CrMo4 chemical,DIN 34CrMo4 ...

DIN 34CrMo4 2014-11-07 15:46:41 Origin: Remark: 0 Click: Technical specifications of DIN 34CrMo4 hardened and tempered steel - Chemical composition, mechanical properties from steelmaking,forging,rolling,heat treatment,cold working.

34CrMo4/1.7220/4135/SCM435TK Alloy Seamless Pipe ...

shunitesteel› …› Hot Rolled Alloy Steel Mechanical Tubing34CrMo4 1.7220 4135 SCM435TK Alloy Seamless Pipe-Mechanical Tubing

On the Microstructural Evolution of 4130 Steel During Hot ...

In this investigation, hot compression tests were performed at 900 °C−1100 °C and strain rate of 0.001−0.1 s¯¹ to study hot deformation behavior and flow stress model of 34CrMo4 steel.[PDF]

STRESS ANALYSIS IN CYLINDRICAL SPECIMENS MADE …

Keywords: Microstructure, tension test, digital image correlation, 34CrMo4 steel, true stress 1 Introduction The 34CrMo4 steel grade is a low-carbon steel with medium through-hardening for medium-[PDF]

EDELSTAHL WITTEN-KREFELD GMBH - schmolz …

microstructure, the strength and the non-metallic inclusions (sul-phides, oxides). Further optimisation of the machinability can be achieved through increasing the level of sulphidic inclusions, by calcium treatment and by heat treatment, i.e. by specifically adjusting the microstructure.

St52 DIN1629 34CrMo4 SAE JIS Hot Rolled Steel Tube / Thin ...

Quality Hot Rolled Steel Tube manufacturers & exporter - buy St52 DIN1629 34CrMo4 SAE JIS Hot Rolled Steel Tube / Thin Wall Seamless Steel Pipe from China manufacturer.

34CrMo4_10083_06_ENG_01.pdf | Heat Treating | Annealing ...

Antoszczyszyn Et Al. - 2014 - Impact of Dilution on the Microstructure and Properties of Ni-based 625 Alloy Coatings

Cheapest Price BS EN 42CrMo4 | 1.7225 Alloy Engineering ...

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability.

34CrMo4 steel resistance against the SSC after controlled ...

The sulphide stress cracking corrosion resistance of 34CrMo4 steel after the accelerated cooling process under the Ar 3 temperature was investigated. Two modes of heat treatment were applied to achieve homogeneous microstructure and at least partially eliminated segregation banding.Authors: Pavel Kucera · Eva MazancovaAffiliation: Technical University of OstravaAbout: Microstructure[PDF]

ESTABLISHING THE MAIN TECHNOLOGICAL …

ESTABLISHING THE MAIN TECHNOLOGICAL PARAMETERS OF INDUCTION SURFACE HARDENING FOR SHAFT PARTS TYPE 1-4. ... axel pieces type made from 41Cr4 and 34CrMo4 steel. This technological parameters is optimum heating ... presented a microstructure of steel pieces before and after the induction surface hardening.[PDF]

THE EFFECT OF FINAL SURFACE TREATMENT OF …

15. - 17. 5. 2013, brno, czech republic, eu the effect of final surface treatment of 34crmo4 steel on resistance to sulphide stress cracking (ssc)

Hot Deformation Characteristics of 34CrMo4 Steel ...

The 34CrMo4 (AISI 4130) steel is extensively utilized in the compressed natural gas cylinders. Due to the importance of thermomechanical processing in the production of these cylinders, the dynamic recrystallization (DRX) characteristics of 34CrMo4 steel were investigated.[PDF]

Material Grade Comparison Table - FpML

E56 Material Grade Comparison Table Stainless Steel and Cast Iron Mat. Group Mat. No. Germany DIN France AFNOR Great Britain BS Italy UNI Sweden SS Spain UNE U.S.A.

Simulation of the Carbides Precipitation Mechanism in ...

The low-alloyed Cr-Mo steels (25CrMo4, 34CrMo4 and 42CrMo4) are used for production of important technical equipment parts in the petrochemical industry, for transportation of the gaseous hydrocarbons, concentrated acids, and lyes. They are also used for rolling of seamless tubes, in the production of pressure bottles, steel bolts, etc. Steel grades 25CrMo4 and 34CrMo4 represents materials ...Published in: International Journal of Materials Science and Applications · 2014Authors: Miroslav Kvicala · Michaela StamborskaAffiliation: Technical University of OstravaAbout: Vanadium · Precipitation

Mechanical Properties of 35CrMoA Steel at High Strain …

The tensile properties of alloy steel 35CrMoA were measured by dynamic tension experimental apparatus, and the stress-strain curves of the material at strain rate range from 10-2/s to 103/s were obtained. The fracture appearance and metallurgical structure were observed for the recovered specimens. The influence of strain rates on mechanical properties and microstructure of the …[PDF]

CROMAX® 42CrMo4 (4140) - Global Metals

DISCLAIMER: This specification is for information purposes only. Global Metals takes no responsibility for the suitability of the steels referred to in this specification without prior[PDF]

Microstructure Transformations in Tempering Steels …

Microstructure Transformations in Tempering Steels during Continuous Cooling from Hot Forging Temperatures F. Nu¨rnberger 1)*, ... very fine microstructures are formed [9]. ... 34CrMo4. The CCT diagram for the material 34CrMo4 (seeFigure4,full-line)showsferritic, pearlitic, bainiticand ...Published in: Steel Research International · 2010Authors: Florian Nurnberger · Olexandr Grydin · Mirko Schaper · Friedrichwilhelm Bach · B Kocz…Affiliation: Leibniz University of Hanover · Czestochowa University of Technology · Agh University …About: Microstructure
Inquiry >>
[email protected]0086-21-61182423
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :